UP TO 50% OFF ALL EXAM PREP PRODUCTS! | PASS YOUR EXAM CONFIDENTLY, ON YOUR FIRST TRY!
UP TO 50% OFF ALL EXAM PREP PRODUCTS! | PASS YOUR EXAM CONFIDENTLY, ON YOUR FIRST TRY!
Add description, images, menus and links to your mega menu
A column with no settings can be used as a spacer
Link to your collections, sales and even external links
Add up to five columns
Add description, images, menus and links to your mega menu
A column with no settings can be used as a spacer
Link to your collections, sales and even external links
Add up to five columns
A. Togay Koralturk
Last updated on November 17, 2026
12 min read

Ask people what makes a neighborhood pleasant, and most of them describe the same things: a café around the corner, a school the children can reach on foot, a park at the end of the street. Planners have a single word for that quality, walkability, and it now appears in apartment listings, public health reports, and green building rating systems. This guide explains what walkability means, how it is measured, and how LEED v5 rewards walkable locations.
On this page
Walkability is a measure of how easily, safely, and comfortably people can reach everyday destinations on foot. A walkable place has shops, schools, workplaces, parks, and transit stops within a short walk of where people live and work, and it has streets and sidewalks that make the walk direct and pleasant.
The definition has two parts, and both of them are needed. The first is proximity, which means that the destinations are close enough to walk to. The second is the quality of the route, which means that the path between the front door and the destination is one that people are willing to use.
Consider two homes that are each 0.25 miles (400 meters) from a grocery store. The first is connected to the store by a continuous sidewalk with street trees and a marked crossing. The second is separated from it by a six-lane road with no sidewalk and no place to cross. The distance is the same, but only the first home is in a walkable location, because the residents of the second home will drive.
The term is used at every scale. A single street can be walkable, and so can a neighborhood or a whole city, and you will see it used by urban planners, public health agencies, real estate websites, and green building rating systems. In each case the question is the same: can the people who use this place meet their daily needs without a car?
A place is walkable when four conditions come together: enough density to support nearby destinations, a mix of land uses, a connected street network, and streets that are safe and comfortable for pedestrians. Access to public transit extends the reach of a walk, and it is usually counted as a fifth element.
The table below explains each element:
| Element of walkability | What it means | What it looks like in practice |
|---|---|---|
| Density | Enough homes and jobs are located in a small area | Apartment buildings and offices give a corner store enough customers to stay open |
| Mix of uses | Homes, shops, services, and workplaces are located together | A pharmacy and a café occupy the ground floor of a residential street |
| Connected street network | Short blocks and frequent intersections give direct routes | A street grid lets you walk straight to the bakery, while a cul-de-sac sends you the long way around |
| Safe and comfortable streets | Sidewalks, crossings, shade, lighting, and slow traffic make walking pleasant | A continuous sidewalk is separated from the traffic by a row of street trees |
| Access to transit | Bus stops and rail stations are within walking distance | A ten-minute walk to a station puts the rest of the city within reach |
Planners often summarize these elements as the five Ds: density, diversity, design, destination accessibility, and distance to transit. The framework comes from the researchers Reid Ewing and Robert Cervero, and it is a useful checklist because each D depends on the others.
The dependence is easy to see when one element is missing. Density without a mix of uses produces a district of apartment towers with nothing to walk to. A mix of uses without a connected street network puts the shops close on the map but far away on foot. And all three can still fail if the sidewalk ends halfway, because a single unsafe crossing is enough to send people back to their cars.
Ready to earn your LEED credential?
200,000+ Learners and Counting
Walkability is important because it changes how people travel, and that affects their health, the environment, and daily life in a community. When destinations are within walking distance, people drive less, which reduces greenhouse gas emissions and air pollution. They are also more physically active, and they meet their neighbors more often.
The benefits fall into three groups:
These benefits are connected, and one decision can deliver all of them. Think about an office that moves from a suburban business park to a street with housing, restaurants, and a rail station nearby. Some employees can now walk to work, others arrive by train, and many leave the car at home at lunchtime. The same move reduces emissions, adds daily exercise, and brings customers to the surrounding businesses.
This is why walkability appears in green building standards. In LEED v5, the credit that rewards walkable locations supports all three of the rating system's impact areas, which are Decarbonization, Quality of Life, and Ecological Conservation and Restoration.
Walkability is measured with scores that combine the distance to destinations with the design of the street network. The two most widely used measures in the United States are Walk Score, which rates an individual address from 0 to 100, and the National Walkability Index, which ranks every census block group in the country.
The table below compares the two measures:
| Walkability measure | Who publishes it | What it rates | Scale |
|---|---|---|---|
| Walk Score | Walk Score, a private company | A single address | 0 to 100 |
| National Walkability Index | U.S. Environmental Protection Agency (EPA) | A census block group | A relative ranking, built from indicators that are each ranked from 1 to 20 |
The two measures answer different questions. Walk Score tells you what can be reached on foot from one front door, which makes it useful for a home buyer or a project team that is evaluating a site. The National Walkability Index compares areas with each other, which makes it useful for planners and researchers.
A census block group is a small statistical area defined by the U.S. Census Bureau, and it usually contains between 600 and 3,000 people. The EPA ranks each block group on indicators such as the mix of jobs and housing and the density of street intersections, and a higher rank means that walking trips are more likely. The results are published as a national map, so you can look up any community.
Numbers are not the only tool. A walkability audit is a structured walk through a neighborhood, in which residents or planners record what they find on the ground, such as missing sidewalks, long waits at crossings, or poor lighting. An audit captures the details that a score calculated from map data cannot see.
A Walk Score is a number from 0 to 100 that rates how walkable a specific address is. It is calculated from the walking routes to nearby amenities such as grocery stores, restaurants, schools, and parks. Amenities within a five-minute walk earn the most points, and amenities more than a 30-minute walk away earn none.
The score is divided into five bands:
| Walk Score | Category | What it means |
|---|---|---|
| 90 to 100 | Walker's Paradise | Daily errands do not require a car |
| 70 to 89 | Very Walkable | Most errands can be accomplished on foot |
| 50 to 69 | Somewhat Walkable | Some errands can be accomplished on foot |
| 25 to 49 | Car-Dependent | Most errands require a car |
| 0 to 24 | Car-Dependent | Almost all errands require a car |
A five-minute walk corresponds to about 0.25 miles (400 meters), so the method rewards the destinations that are truly around the corner. The points decrease as the distance grows. The calculation also considers how friendly the area is to pedestrians, using the population density, the length of the blocks, and the density of the intersections.
In practice, a score of 70 or more is generally considered good, because it means that most errands can be done on foot. Keep in mind what the score does not include. It is calculated from map data, so it does not inspect the condition of the sidewalks or the safety of the crossings, and it is best read together with a visit to the site.
LEED v5 rewards walkability through the Compact and Connected Development credit in the Location and Transportation category. Under the credit's Walkable Location option, a project earns 1 to 3 points when its site has a Walk Score of 60 or more, or when enough everyday uses lie within 0.5 miles (800 meters) walking distance of an entrance.
LEED (Leadership in Energy and Environmental Design) is the green building rating system developed by the U.S. Green Building Council (USGBC), and LEED v5 is its current version. In LEED v5 for Building Design and Construction, the Compact and Connected Development credit is worth up to 6 points for New Construction projects, and it combines three ideas: surrounding density, access to transit, and a walkable location.
A project team can document a walkable location in two ways, and the points are the same for both:
| Walk Score of the site | Number of uses within 0.5 miles (800 meters) | LEED v5 points |
|---|---|---|
| 60 to 69 | 4 to 7 | 1 |
| 70 to 79 | 8 to 10 | 2 |
| 80 or more | 11 or more | 3 |
The first way is the Walk Score itself. The score must be a supported one, which means that it is based on verified, publicly available data for that address.
The second way is to count the uses near the site, which are existing, publicly available destinations such as a supermarket, a bank, or a public library. LEED v5 groups them into five categories: food retail, community-serving retail, services, civic and community facilities, and community anchor uses. Three rules apply to the count:
Consider an office project whose main entrance is within 0.5 miles of a supermarket, a pharmacy, a hardware store, a bank, a gym, a public library, a public park, and a licensed childcare center. That is eight uses from four categories, so the project earns 2 points. If three more qualifying uses opened nearby before the project was documented, it would reach 11 uses and earn the third point.
The distance matters as much as the count. LEED v5 uses 0.5 miles because it corresponds to a walk of roughly 10 minutes, and the distance is measured along the route a pedestrian would actually follow from a functional entry of the building. The same credit applies the idea to transit, where bus stops count within 0.25 miles (400 meters) and rail stations within 0.5 miles.
There is one more point to understand, which is the timing. Walkability cannot be added to a project after the site is chosen, so this credit is decided at the very beginning, during site selection. This is one reason why LEED encourages integrative design, in which the whole team is involved from the earliest decisions. You can see where the credit sits among the others in our guides to the LEED credit library and the LEED scorecard.
For exam candidates, walkable locations are a recurring theme of the Location and Transportation category. Our LEED AP BD+C exam prep covers the requirements credit by credit, and our best-selling LEED Green Associate study guide explains the concepts behind them from the beginning.
Walkability improves when communities bring destinations closer together and make streets better for people on foot. The most effective measures are allowing a mix of homes, shops, and services in the same area, connecting streets and paths, building continuous sidewalks and safe crossings, slowing traffic, and adding shade and lighting.
Cities and towns control most of these measures, because they write the zoning rules and build the streets. A city can allow shops on the ground floor of residential buildings, require new developments to connect to the streets around them, and narrow wide roads so that traffic slows and crossings become shorter.
Project teams have fewer tools, but the ones they have are effective:
Each of these measures helps the others. A new ground-floor shop gives the neighbors one more destination, the path across the site shortens their walk to it, and the shade of the new street trees makes that walk comfortable in summer. Walkable streets are also an important theme of LEED for Neighborhood Development, the rating system behind the LEED AP ND credential.
Ready to earn your LEED credential?
200,000+ Learners and Counting
Walkability is how easy, safe, and comfortable it is to reach everyday destinations on foot. A walkable place has shops, schools, parks, and transit stops within a short walk, joined by sidewalks and crossings that people are willing to use.
A walkable city is one where most residents can meet their daily needs without a car. Its neighborhoods combine homes, shops, and services, its streets are connected and safe for pedestrians, and public transit links the neighborhoods to each other.
A Walk Score of 70 or more is generally considered good. Scores from 70 to 89 are rated Very Walkable, which means most errands can be accomplished on foot, and scores from 90 to 100 are rated Walker's Paradise. LEED v5 starts awarding points at a Walk Score of 60.
Walkability is most often measured with Walk Score, which rates an address from 0 to 100 based on the walking routes to nearby amenities, and with the EPA's National Walkability Index, which ranks every census block group in the United States. Walkability audits add observations made on the ground.
Walkability reduces the need to drive, which lowers greenhouse gas emissions and air pollution. It also builds physical activity into daily life, supports local businesses, and gives independence to people who cannot drive or do not own a car.
LEED v5 rewards it through the Walkable Location option of the Compact and Connected Development credit. A project earns 1 to 3 points for a site with a Walk Score of 60 or more, or for a site with at least four qualifying uses within 0.5 miles (800 meters) walking distance.
Yes, at a conceptual level. Green Associate candidates should know that LEED rewards projects located in dense, walkable areas near transit and everyday services, because these locations reduce driving and the emissions that come with it.
Yes, in detail. AP BD+C candidates should understand the Compact and Connected Development credit in LEED v5, including the Walk Score thresholds, the number of uses required within 0.5 miles, and the rules for counting those uses under the Walkable Location option.
A. Togay Koralturk is a globally recognized pioneer and educator in sustainable design and construction, as well as an international best-selling author of LEED study guides. His LEED publications have reached tens of thousands of professionals worldwide and have been widely adopted as primary course materials at leading universities across the United States. Holding a bachelor’s degree in civil engineering and a master’s degree in construction management from the University of Southern California, he began his career in Los Angeles, CA, earning his LEED AP® credential along the way in 2008. He has helped numerous projects pursue LEED certification worldwide and has educated thousands of professionals.